Grafik 1Grafik 2 Grafik 3
  our productshigh voltage disconnectors centre breaks
Grafik 4

  High voltage
    Double breaks
  Centre breaks
  Earthing switches
  Toughended glass insulators
  Surge arresters
  Transformer stations
  Metallic structures for overhead lines and substations
  Medium voltage
  Low voltage
  Special offers

Centre breaks
rote Linie
Type CBD  
  rated voltage [kV] 72,5 - 550
  rated current [A] 1250 - 4000

rated short-time current 3s [kA]

up to 63

Centre break disconnectors type CBD consists of three poles. Each pole consists of a frame, two rotating support insulators and a main blade that moves horizontally. The main blade consists of a U-shaped tube, in which the main contacts and the rotating contacts are installed. The rotating contact consists of a silver-plated copper pin and a bronze housing. Silver-plated bronze balls, which are pressed against these two parts by means of a stainless steel spring, ensure that the current is transferred from the pin into the housing. This contact construction is sealed and maintenance free. All CBD are for outdoor use.

The disconnectors can be equipped with insulators in accordance with DIN, IEC or other specifications.

Centre break disconnectors are operated single-pole or three-pole by means of a motor or manual operated drive mechanism inside an IP54 housing, with torques up 850Nm and including up to 10 auxiliary contacts for position indication.

Optional earthing switches can be build-on to the horizontal double break disconnector to the right hand side and/or to the left hand side.

The disconnectors are designed and tested in accordance with latest IEC specifications.


More than 70 years experience

Durable and reliable design

Pre-assembled and adjusted in our works for quick installation

Easy installation and adjustment at site without special tools
Suitable for installation in areas with severe climatic conditions
Virtually maintenance free
Long service life

Some Technical Features
Square tube frame with bearing housing and the turntable installed in the centre
Turntable supported by two roller bearings with bearing housing sealed and filled up with grease
Silver-plated copper contacts installed inside the main blade
Sealed contact construction
Self-cleansing contacts
Optional anti-corona shields depending on voltage rating
Hot-dip galvanized steel parts

Latest News
Daimlerstraße 8
91301 Forchheim

Phone: +49 9191 733 668 0
Fax: +49 9191 733 668 9

  Cast Resin Transformer
© COPYRIGHT 2005-2020 Energy Alliance AG. All rights reserved.